How much does it cost to pay someone to put up Christmas lights?

Our 2026 first-installation rates are $6.50/ft before October 12, $8/ft October 12–November 4, $11/ft November 5–Thanksgiving (November 26), and $14/ft after Thanksgiving. Installation, takedown and storage are included. Your 50% deposit locks the applicable rate. Plus sales tax where applicable.

Do you provide the lights?

Yes. We supply and own the commercial-grade Wintergreen C9 LED lights; you pay for the season. Choose warm white, pure white, red, green, blue, multicolor, red and white, or red and green.

Does the price include takedown and storage?

Yes. Installation, January takedown and storage are included. We test and label the lights before storing them. Reinstallation of our stored lights is $4.50/ft, with takedown and storage included.

Christmas Lights on Trees and Bushes: How Pros Light Them

Pick the look: five ways to light a tree or shrub

Each look suits a different kind of plant, and the one you pick decides how many lights you need, how high you have to reach and how long it takes.

Look	What it is	Best on	Trade-off
Trunk wrap	Lights spiraled up the trunk to the first branches	Deciduous trees with a clear trunk	Quickest; reads as a glowing column
Trunk and branch wrap	The spiral carries on out the main branches, usually 3 to 4 feet	Maples, oaks, birches and other trees that are bare in winter	The best show per tree, and the most lights and ladder time
Canopy drape	Strands laid over the outer branches instead of wound around them	Big, full trees you can't wrap	Fast from a pole or lift; nothing circles a branch
Evergreen spiral	C7 or C9 bulbs wound around the outside of the cone, bottom to top	Firs, spruces and pines	Big bulbs read from the street; tall trees need a lift
Net lights	A ready-made grid of mini lights draped over the plant	Round and square shrubs, hedges	Even coverage in minutes; nothing to wrap

Deciduous trees, evergreens and hedges: which look suits which

Deciduous trees such as maples, oaks, birches and dogwoods are bare through the holidays, so the branch structure is the display. Wrap the trunk and a few strong, well-spaced branches rather than every limb. A lighting retailer's calculator puts about 8 inches between bulbs as the ideal for them.
Evergreens such as firs, spruces, pines and cedars hide a wrapped trunk behind their needles, so light the outside instead: spiral bulbs around the cone or drape the outer branches. The same retailer says C7 and C9 bulbs are the most popular choice on larger evergreens, and that lighting the canopy gets you brightness without climbing to the top. For a permanent wrap on a fir, we spiral the trunk and run lights along the lowest tiers.
Young or newly planted trees are the ones to leave alone. Davey Tree's arborists say to avoid draping new or young trees, and NDSU Extension singles out trees planted in the last few years as the ones to check for leftover wires and ties.
Hedges and shrubs take net lights, or strands tucked into the outer foliage. They're the easiest part of a display to do yourself, and they have their own section below.
Trees near power lines come with one rule: look up before you climb, raise a pole or lean a ladder. Clark Public Utilities tells customers to look for lines before climbing a tree and to call the utility to have a tree trimmed away from lines that run through it.

How many lights a tree takes

Measure three things: the trunk's circumference (wrap a string around it, then measure the string), the height you'll wrap to, and the gap you want between wraps. Then:

Turns = height ÷ gap between wraps.
Feet of lit string = turns × circumference. Work out each branch the same way and add them up.
Lights = feet of lit string ÷ bulb spacing.

Tree	What's lit	Gap and spacing	Lit length	Lights
Deciduous tree, trunk 3 ft around	Trunk to 8 ft	Wraps 4 in. apart, a bulb every 6 in.	72 ft	144
Maple, 25 to 30 ft tall, four main branches	Trunk and branches, permanent wrap	A diamond light every 24 in.	180–220 ft	90–110
Fir, 20 ft tall, 12 ft across at the base	Outside spiral, bottom to top	Turns 18 in. apart, a C9 every 12 in.	≈250 ft	≈250

How to wrap a tree with Christmas lights, step by step

For a seasonal wrap with string lights:

Test every set on the ground, then wind each one into a ball so it unrolls as you walk it around the trunk.
Start at the base, with the plug end on the side nearest the outlet.
Wrap upward and keep the gap between wraps even. Snug enough that it won't slide, never cinched tight.
At each branch you've picked, wrap out 3 to 4 feet with a wider gap, come back down filling in between, and cross to the next branch at its base.
Plug each new set into the last one as you go, up to the connected-set limit printed on the package. Past that, start a new run on its own cord.
Tuck the last bulb under a wrap instead of zip-tying it, so nothing is left behind to girdle the branch.
Set a timer to switch the tree off at bedtime.

Protecting the tree: loose wraps, no hardware and a date to take them down

Lights don't hurt a tree; what's left around it does. NDSU Extension's tree specialists warn that any wire, strap, zip tie, cable or rope left circling a trunk or branch will eventually girdle it, whether that takes two years or twenty, and they count the ties that hold Christmas lights in that list.

Davey Tree's arborists say the same about lights left up year-round: laying lights over branches can be fine, but wrapping around a branch, spirals included, will eventually girdle it.

Nothing goes into the bark: no nails, screws or staples.
Wrap loosely, with room to spare. Never cinch a strand around a branch.
Take seasonal lights down, ties included, before spring growth. Our seasonal takedowns run January 2–15.
Put tree lights on a timer that ends at bedtime. The CPSC's decorating tips say to switch tree lights off when you go to bed or leave the house.
A year-round wrap needs its tension checked every year as the trunk and limbs thicken. Ours go on loose with no hardware in the tree; ask at the measure how that yearly check is handled.

Power, rain and outlets

Outdoor tree lights sit at the wet end of the extension cord. In a normal November, Vancouver gets measurable rain on about 19 days (NOAA's 1991–2020 normals), so treat every connection as if it will be rained on.

Use lights and cords labeled for outdoor use. The CPSC and UL add that on most decorative sets sold in stores, UL's red holographic label means indoor and outdoor use, and the green one means indoor only.
Plug into a GFCI-protected outdoor outlet or a portable GFCI. A GFCI cuts the power when there's a ground fault, which can happen when equipment gets wet.
Check the connected-set limit before plugging strands end to end. The CPSC's rule for incandescent sets is never more than three; LED sets allow more, and the limit printed on the package is the one that counts.
Keep plugs and connections off the ground. A lighting retailer's advice for hedges is a foot of clearance, so nothing sits in water or snow. The same rules hold on the roofline: see how to hang Christmas lights on your house.
Never cut, splice or re-plug a strand, and don't add an outlet yourself. In Washington, L&I says custom cut-to-fit lighting takes a licensed electrical contractor, with permits and inspections, while unaltered off-the-shelf sets don't. A new outdoor outlet is an electrician's job.

Bushes and hedges: nets, strands and where the plug goes

Shrubs are the easiest part of a display to do yourself: nothing needs a ladder, and net lights do most of the work. Net lights aren't part of our published seasonal package; if you want shrubs lit along with the roofline, mention them when you book and we'll tell you at the measure whether we can include them.

Size the net to the shrub. A lighting retailer's sizing: a 4-by-6-foot net covers a shrub up to about 3 feet tall and 3 feet wide. Go to 4 by 8, or join nets end to end, for bigger plants, and size up when in doubt, because a net that's too small won't reach the sides.
Square or boxy shrubs: start at a corner and drape the net the way you'd wrap a present.
Round and cone-shaped shrubs: turn the net vertical and hang overlapping panels around the plant, so the lights don't bunch at the top.
Hedges: lay the nets side by side on the ground first, all facing the same way, then lift them on without overlapping the seams.
Strands instead of nets: tuck them into the outer foliage in a random pattern, covering the top and about three-quarters of the way down the sides.
Power: hold each net so its plug sits at the bottom corner nearest the outlet, bring power to the middle of a long hedge and run lights both ways, and keep connections a foot off the ground.

A seasonal quote for your roofline

Our 2026 first-installation rate is $6.50–$14 per foot, depending on when you pay the 50% deposit. Installation, takedown and storage are included. Reinstallation of our stored lights is $4.50 per foot.

We supply and own the seasonal lights. Choose your roofline and color scheme, then request a free on-site measure. Your written quote confirms the actual footage, scope, tax and installation date. Paying the 50% deposit locks the rate, even when the installation falls in a later price window.

We guarantee a fix within 48 hours for our lights during the season, weather permitting. January takedown is planned for January 2–15 on the date agreed in the quote. We test, label and store the lights until next season. Extra services and customer-supplied lights need separate confirmation.

Sources & further reading

Research originally checked September 26, 2026. Product figures and utility examples are dated research, not a quote for your installation. Follow current product labels and check the original source for updates.

Keep planning your season

Our 2026 prices Find your town All guides

Christmas lights on trees and bushes: wraps, light counts and costs